Powerful, fast and compact, the TAS units in DEIF’s transducer range measure sinusoidal alternating voltage and/or current signal and provide output signal as direct current or voltage signal proportional to measurements for PLCs, PCs, microprocessor control, indicators, alarm units etc.
TAS transducers are micro-controller-based with one analogue output for measurement of power, voltage, current etc. on an AC network. Because these transducers have no mechanical parts like potentiometers, the calibration stability is excellent.
TAS transducers can be delivered pre-configured to set measuring values and ranges or un-configured for customer configuration using DEIF’s free PC tool.
Variants
TAS-311DG
- Factory-configured transducer for voltage, current, frequency or phase angle measurement.
- Aux supply: from 57 to 690 V AC.
- Aux supply: 24 to 220 V DC.
TAS-321DG
- Factory-configured transducer for bidirectional current measurement.
- Aux supply: from 57 to 690 V AC.
- Aux supply: 24 to 220 V DC.
TAS-331DG
- Factory-configured transducer for power or reactive power measurement.
- Aux supply: from 57 to 690 V AC.
- Aux supply: 24 to 220 V DC.
You might also like
AC transducer for active or reactive power TAS-311DG
- Factory-configured transducer for voltage, current, frequency or phase angle measurement
- Aux supply: from 57 to 690 V AC
- Aux supply: 24 to 220 V DC
- Class 0.5 measurement
- Supply and measuring voltage up to 690 V
- Pre-configuration or easy PC tool configuration
- Configurable up to three output slopes
AC transducer for U, I, PA, f TAS-331DG
Transducer range, TAS 331DG - Features
The transducer range by DEIF has a long list of features
- Factory-configured transducer for power or reactive power measurement.
- Aux supply: from 57 to 690 V AC
- Aux supply: 24 to 220 V DC
- Class 0.5 measurement
- Supply and measuring voltage up to 690 V
- Pre-configuration or easy PC tool configuration
- Configurable up to three output slopes
MTR-4 Multi-transducer MTR-4
- Suitable for all 1- and 3-phase network topologies
- Up to 1,000 VL-L AC input
- Accuracy class: 0.5 or 0.4
- Up to 4 analogue outputs
- Fast response time, less than 50 ms
- Measures more than 50 parameters
- RS-485 serial Modbus communication
- Fully configurable by USB, no aux. supply required
- Universal power supply of 20 to 300 V DC/48 to 276 V AC