Multi-line 2 AGC Application Software series 2.x.

You’re about to download Multi-line 2 AGC Application Software series 2.x.

The software you are trying to download is obsolete. Please download the latest version from this page.

You have chosen to download our software.

Within a few seconds, you will receive an email containing a download link.

Having trouble using the software? Please contact support@deif.com. 

Best regards, 

DEIF A/S

The software is subject to copyright DEIF A/S
By following the above mentioned link and downloading the file you automatically accept DEIF A/S copyright and license agreement (EULA). The license agreement can be found on www.deif.com/software

This software applies to the following DEIF products:

You’re about to download 2.40.9

The main changes implemented since the last version are as follows:

Corrections:

  • Update of self-check functionality
Ver. Date Description

2.40.9

01/07/2015

Corrections:

  • Update of self-check functionality

2.40.8

16/03/2015

Corrections:

  • Update of self-check functionality
  • Vector jump calculation improved
  • Zero sequence alarms improved

2.40.7

11/03/2011
  • Improved handling of Running hour counter.

2.40.6

10/03/2009
  • Support of reverse vdo input 104
  • Modified power indication in display

2.40.5

05/11/2008

ModeShift handling updated

2.40.4

14/05/2007

Changes:

  • Updates made in Engine communication.
  • Updates made in power ramp functionality.

2.40.3

16/03/2007

Updates made in Island mode.

2.40.2

21/12/2006

Updates made in TB handling.

2.40.1

29/11/2006

Updates made in Variable Multi Start functionality.

2.40.0

12/10/2006

Changes:

  • EF5 option implemented.

2.34.3

02/10/2006

Changes:

  • C2 and A4 functionality updated.

2.34.2

06/06/2006

Changes:

  • Mode shift handling in LTO updated.
  • Simple test in AMF updated.
  • Handling of priorities improved.

2.34.1

08/05/2006

Changes:

  • Improvements made for handling MB/TB synchronization.
  • Improvement made in fuel optimization priority routine.
  • Breaker spring load timer functionality added.

2.33.3

27/03/2006

Changes:

  • Enable/Disable of "Short time parallel" accessable via MLogic.
  • Improvement made in single appl. AMF sequence when using "Start engine".
  • Improvement made in G5 appl. for handling different nominal voltage level between DG's and Mains unit.

2.32.2

08/03/2006

Changes:

  • 4-20mA analogue inputs on M1, M2 and M15 now supported in a mains unit.

2.33.1

02/02/2006

Changes:

  • Updates made in "Close before excitation" functionality.
  • MPE mode can now also be set up to import a fixed power.
  • MLogic updated to apply to rules for boolean algebra.
  • Updates made in single DG ramping functionality.
  • Improvements made for handling switching between a parallel operation and ISLAND mode.

2.32.0

29/11/2005

Changes:

  • Ramp up/down improved in G5 to obtain ramping after backsync of MB.
  • SoftSync functyionality opened up.
  • Updates made regarding LTO together with SoftSync.
  • 2nd set of nominal settings implemetet.
  • Manual control of gov/AVR increasing/decreasing added in MLogic.
  • Possibility if using a start enable input added.

2.30.1

06/10/2005

Changes:

  • load group handling added.
  • Relay configuration updated.
  • Transistor outputs for kWh and kVArh counter made configurable.
  • Auto acknowledge added.
  • Custom alarm inhibit added.
  • Seperate synchronisation functionality implemented.
  • Ramp up/down implemented in G5. Meaning whenever running parallel to mains and the power set point is altered
    Tge DG(s) will ramp to new set point.

2.30.0

05/10/2005

Changes:

  • Available power1&2 Menues added for adding load gruppes.
  • Relays can now be selected to either ALARM, LIMIT or HORN.
    Hereby the normal horn relay (relay11) can no be used as a
    LIMIT or HORN relay as well.
  • The transistors for kWh and kVArh counter can no be selected as continues.
    This means they can be selected as having normal relay functionality (relay12 and 13).
  • Auto acknowledge added. Via MLogic it is possible to set an alarm to autoacknowledge.
  • Custom alarm inhibit added. Via MLogic it is possible to set an alarm to be inhibited when
    the custom alarm input (configurable) is active.
  • Seperate synchronisation functionality implemented.

10.30.1

05/10/2005

Changes:

  • Ramp up/down implemented in G5. Meaning whenever running parallel to mains and the power set point is altered Tge DG(s) will ramp to new set point.

2.11.5

13/06/2005

Changes:

  • Use of Digital running feedback in regard to start sequence adjusted
  • Mode switched using remote control (M-Logic or configurable or modbus) adjusted

2.11.4

30/05/2005

Name of downloadable zip-file corrected - software is unchanged (the name of the zip-file is corrected to 2114 - before it was wrongly named 2113)

2.11.4

27/05/2005

Changes:

  • "Trip + Stop" alarm in G5 applications adjusted
  • Limit relay handling adjusted
  • Minor changes in menus (spelling)

2.11.3

25/05/2005

Changes:

  • Changes to avoid frequency drop during deload in island mode

2.11.2

29/03/2005

Changes:

  • Running detection functionality improved
  • Adjustment when using German display
  • Improvement of short time parallel performance
  • Mains failure detection when using phase/neutral measurements adjusted
  • Several minor adjustments of menus

2.11.1

04/03/2005

Changes:

  • RPM measurements optimised
  • Weekday manipulation is implemented
  • Reset of PWM output changed
  • The 'Year' indication in the log is corrected

2.11.0

21/01/2005

Changes:

  • Priority routine ”Fuel optimisation” updated
  • CAN alarm handling changed
  • Priority routine ”Running hour” updated
  • View lines updated
  • Delod routine updated in SEMI AUTO mode
  • Regulation reset updated
  • Start next DG in case of failure updated

2.10.2

14/12/2004

Changes:

  • AGC option G5: Start sequence regarding priority change adjusted

2.10.1

28/11/2004

New features:

  • New language structure similar to the BGC.
  • Phase - Neutral voltage trip similar to the PPU, GPU,GPC
  • Derate of Pnom (Described in Designers Ref. Handb.)
  • Idle run (Described in Designers Ref. Handb.)
  • Master Clock (Described in Designers Ref. Handb.)
  • Battery test (Described in Designers Ref. Handb.)
  • Wire break detection on analogue inputs (4- 20 mA, VDO, PT100)
  • External sync. start / close breaker
  • Support of AGC_GER display similar to BGC 0108 display.
  • New priority routine for option G5 (Fuel optimisation)
  • Support of ATS (Automatic Transfer Switch) applications in option G5
  • TB synchronises in LTO and AMF mode in option G5
  • Modbus updated to support new GDU features
  • M-Logic updated to support AOP setup

2.00.4

25/08/2004

Changes:

  • Menu handling in regard to Option C1 adjusted
  • The power calculation regarding loadsharing in PMS is optimised
  • Menu handling in regard to Governor control adjusted
  • Calculations used for scaling analogue input is optimised
  • Configurable texts are adjusted in length
  • Scaling of power-factor measurement in USW protocol changed
  • Factory settings for emergency modified.

2.00.3

27/07/2004

Changes:

  • Mains LED status improved
  • Offset possibility for number of GB and MB operations are added
  • Number of events in the Eventlog is increased
  • Fuel relay logic is improved
  • M-logic is improved regarding running detection
  • Modeshift functionality improved
  • Option M12 functionality improved
  • Option C2 functionality improved
  • GB sync function improved in ISLAND mode Single DG
  • Option EF4 menu handling improved

2.00.1

05/05/2004

Changes:

  • Some menus are adjusted
  • Frequency control for stand alone generator improved
  • Governor control when operating the breaker is improved
  • Improvement of low voltage BB-measurements

2.00.0

14/04/2004

New features:

  • PMS-functionality added
  • BLOCK-mode implemented
  • Support of GSM communication

Changes:

  • New menu-structure implemented
  • Mod-bus and Profi-bus protocols changed
  • Changed numbering of all inputs

On this page, you can download software updates for your product(s) and help yourself to various utility tools and add-ons that will assist you in setting up, detecting faults and configuring your product(s).

Please be advised that not all of our products can be updated by the user. Nor do all of our products come with a utility tool. Consequently, the list on this page cannot be considered an overview of our product programme.

DEIF will register your download along with the used e-mail address for the purpose of sending out information on future updates, if requested.

DEIF cannot be made responsible for any consequences of failed product updates or use of utility tools. Nor can DEIF A/S be made responsible for consequences of changes in behaviour of products due to a software upgrade. It is always the responsibility of the user to ensure correct set-up and configuration before commissioning. Please study the version log of the software before updating the product.

Licence agreement for software downloaded from www.deif.com

Downloaded software remains the property of DEIF. The software may not be distributed for commercial purposes, changed or reused in full or in part or sold to any third parties.

The latest versions for full functionality

As always, we recommend that you install our offered improvements to fully utilise your DEIF product.

All improved software can be downloaded at your convenience at www.deif.com under “Software”.

Should you have any questions or experience problems finding the relevant software for your product, please feel free to call DEIF A/S at +45 96149614 or your relevant local DEIF office. Alternatively, we are always ready to assist you, if you send an e-mail to support@deif.com.

Read more